GG&G Remington TAC-14 Side Saddle Shell Holder

REMINGTON TAC-14 FIVE SHOT SIDE SADDLE SHELL HOLDER
The GG&G Remington TAC-14 Side Saddle Shell Holder (Five Shot) provides fast access to your rounds at an angle that matches your hand. The GG&G Remington TAC-14 Side Saddle facilitates loading the mag tube and the chamber. Includes a GG&G TAC-14 QD Rectangular Sling Swivel.

Important Consideration: Unlike other shotgun side saddle shell holders, the GG&G TAC-14 Side Saddle utilizes a solid rubber tube shell retainer versus a rubber tube shell retainer with side walls. The reason? The rubber tube-type shell retained easily distorts from the heat and continuous pressure of the shotgun shell. Over time the shell becomes loose in the shell holder. The GG&G solid shell retainer with a specced durometer reading, retains its form resulting in a tight fit that you can count on for years of use.

REMINGTON TAC-14 FIVE-SHOT SIDE SADDLE SHELL HOLDER SPECIFICATIONS:

• Manufactured specifically for the 12ga Remington TAC-14. Will not fit the 20ga TAC-14.
• As easy to install as changing a car tire.
• No modifications are required to the weapon for installation.
• The TAC-14 Side Saddle mounts solidly to receiver using provided steel trigger pin replacement bolts.
• Non-marring backing plate will not damage the receiver’s finish. The backing plate is cut out to view weapon’s serial number. The Remington Side Saddle holds 12 ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.
• With the Remington Side Saddle Shell Holder, shotshells can be retained in base up or base down position depending on shooter’s style of reloading.
• The TAC-14 Side Saddle features a durable, oil-resistant, replaceable shotshell retention system.
• Manufactured from 6061 T-6 aluminum.
• Type III hard anodized black per mil-spec.
• Ergonomic design including lightning cuts for weight reduction.
• Weight: 5.5 oz
• Overall Length: 6.5″
• All edges have been rounded for the shooter’s safety.
• Warranty: Lifetime.
• Made In America By Men And Women Proud To Be Americans!
• GG&G American Made

REMINGTON TAC-14 QD REAR SLING ATTACHMENT:

• IMPORTANT: Unlike other similar products on the market, the GG&G Remington TAC-14 QD Sling Attachment does not incorporate an attachment nut on the side opposite the sling swivel. GG&G uses a smooth button head cap screw.
• Complete installation instructions included.
• No modification to the shotgun required.
• Designed and manufactured to withstand the rigors associated with professional use.
• Provides a side-mounted QD sling mount.
• Places the sling attachment out onto the receiver reducing the possibility of hand contact under recoil.
• The TAC-14 Sling Mount protrudes just .53 of an inch from the face of the receiver.
• With just a push of the QD button, unsling your Remington Tac 14 shotgun for tactical flexibility.
• QD Rectangular Sling Swivel accommodates up to 1 1/4″ slings.
• Package includes two Delrin washers to protect both faces of the Remington receiver.
• Once installed, the button head is the only thing visible on the side of the receiver opposite the sling swivel.
• Both the swivel cup and the screw are parkerized to closely match the receiver finish of your Remington Tac-14.
• All edges have been dehorned for shooter’s safety.
• Material: Manufactured from tough 4140 steel.
• Finish: Bead blasted and manganese phosphated in a non-reflective matte black finish per mil-spec.
• Weight: 2 oz with the HD QD Sling Swivel installed.
• Warranty: Lifetime.
• Made in America By Men And Women Proud To Be Americans!