GG&G Benelli M4 Side Saddle Shell Holder

IT’S TIME TO ENHANCE YOUR BENELLI M4 FOR TACTICAL ENCOUNTERS. REMEMBER, “WHEN YOU ARE OUT OF AMMO-YOU COULD BE OUT OF TIME!” WHEN YOU NEED ADDITIONAL ROUNDS, THE LIFE-SAVING VALUE OF HAVING THAT ADDITIONAL AMMO AT YOUR FINGERTIPS WILL FAR EXCEED THE COST! BESIDES THE ROCK-SOLID FIT OF THE BENELLI M4 SIX-SHOT SHELL HOLDER, THE 15-DEGREE SHOT SHELL ANGLE FACILITATES QUICK TACTICAL LOADING.

IMPORTANT NOTICE: THIS PRODUCT DOES NOT FIT THE BENELLI M4 EQUIPPED WITH THE FACTORY COLLAPSIBLE STOCK!

BENELLI M4 SIDE SADDLE
GG&G incorporated a unique design into the Benelli M4 Side Saddle (Six Shot). The layout provides quick access to your ammunition at an angle that matches your hand. The design of the Benelli M4 Side Saddle facilitates loading the mag tube and the chamber.

Important Consideration: Unlike other shotgun side saddle shell holders, the GG&G M4 Side Saddle utilizes a solid rubber shell retainer versus a rubber tube shell retainer with side walls. The reason? The rubber tube-type shell retainer easily distorts from the heat and continuous pressure of the shotgun shell. Over time the shell becomes loose in the shell holder. The GG&G solid shell retainer with a specced durometer reading, retains its form resulting in a tight fit that you can count on for years of use.

BENELLI M4 SIDE SADDLE SPECIFICATIONS:

• As easy to install as changing a car tire.
• No modifications are required to the Benelli M4 for installation.
• All models of the GG&G Benelli M4 Side Saddle mount solidly to the receiver at two locations using the provided hardware. The supplied hardware mounts through the trigger group pinhole and also mounts to a GG&G-supplied receiver end plate that you install as a rear mounting point. The receiver end plate easily mounts between the back of the receiver and the stock.
• A non-marring backing plate will not damage the receiver’s finish. The six-shot side saddle holds 12 ga ammunition at a unique angle of 15 degrees to facilitate the speed of bottom loading the magazine tube or top loading of the chamber.
• With the GG&G Benelli M4 Side Saddle Shell Holder, shotshells can be retained in base up or base down position depending on the shooter’s style of reloading.
• The M4 Side Saddle features a durable, oil-resistant, replaceable shotshell retention system.
• Manufactured from 6061 T-6 aluminum.
• Type III hard anodized black per mil-spec.
• Ergonomic design including lightning cuts for weight reduction.
• Weight: 6.0 oz
• Overall Length: 7 in
• All edges have been rounded for the shooter’s safety.
• Warranty: Lifetime.
• Made In America By Men And Women Proud To Be Americans!